Do you need custom fasteners created with Inconel™ 925? Since our inception, Elgin Fastener Group has met every challenge of providing Quality, Timely, Cost-effective solutions for specialty fastener applications. Every product is built to your specifications, using your prints if necessary.
Below are the technical specifications of the Inconel™ 925 Bar Stock we have available to meet your needs.
Special Metals INCOLOY® Alloy 925
Subcategory: Metal; Nickel Base; Superalloy
Key Words: UNS N09925; NACE MR-01-75
A precipitation-hardenable nickel-iron-chromium alloy with additions of molybdenum and copper. It combines the high strength of a precipitation-hardenable alloy with the excellent corrosion resistance of INCOLOY alloy 825. The alloy has outstanding resistance to general corrosion, pitting, crevice corrosion, and stress-corrosion cracking in many aqueous environments including those containing sulfides and chlorides. Used for surface and down-hole hardware in sour gas wells and for oil-production equipment. Standard product forms are round, flats, forging stock, pipe, tube, and wire.
Data provided by the manufacturer, Special Metals.
|Density||8.05 g/cc||0.291 lb/in³|
|Tensile Strength, Ultimate||1210 MPa||175000 psi||Precipitation Hardened. Value at room temperature. Value at 550°C is 970 MPa.|
|Tensile Strength, Yield||810 MPa||117000 psi||Precipitation Hardened. Value at room temperature; 0.2% offset. Value at 550°C is 700 MPa.|
|Elongation at Break||24 %||24 %||Precipitation Hardened. Value at room temperature. Value at 550°C is 25%.|
|Electrical Resistivity||0.000117 ohm-cm||0.000117 ohm-cm|
|Magnetic Permeability||1.001||1.001||at 200 oersted (15.9 kA/m)|
|CTE, linear 20°C||13.2 µm/m-°C||7.33 µin/in-°F||20-100°C|
|Heat Capacity||0.435 J/g-°C||0.104 BTU/lb-°F|
|Melting Point||1311 – 1366 °C||2390 – 2490 °F|
|Solidus||1311 °C||2390 °F|
|Liquidus||1366 °C||2490 °F|